triada писал(а):Наигрался. В режиме выключенном по кнопке инфо понажимал, вышел общий пробег где КЛЮЧ нарисован и сколько до ТО... нечайно стер.
Теперь горит ВАМ до ТО 24 мес или 29 200 км.
Как то вернуться можно чтобы то 15000 он показывал???
Вот инструкции по напоминанию о сроках ТО из фирменного руководства:
HOW TO CANCEL THE SERVICE REMINDER WARNING (Как отменить напоминание)
caution
Be careful not to execute the service reminder warning cancellation by operating the switch again after erasing the service reminder warning indicator which is currently output, because the next warning period will be cancelled.
If the next warning period is cancelled by mistake, the cancelled warning period can be restored by setting a schedule different from the current one once, and then returning it to the previous schedule.
1.Turn the ignition switch to the "OFF" position.
2.By operating the meter information switch, the warning period is displayed on the odometer.
3.Press the meter information switch once for 1.2 seconds or longer.
4.The service reminder indicator flashes.
5.While the service reminder indicator flashes, press the meter information switch once for less than 1.2 seconds.
6.The service reminder indicator is turned ON, and "CLEAR" is displayed on the odometer display for 3 seconds.
7.After "CLEAR" is displayed for 3 seconds, the warning period to the next time is displayed.
HOW TO SET THE SCHEDULE (Как задать расписание)
1.Turn the ignition switch to the "OFF" position.
2.By operating the meter information switch, the warning period is displayed on the odometer.
3.Press the meter information switch once for 1.2 seconds or longer.
4.The service reminder indicator flashes.
5.While the service reminder indicator flashes, press the meter information switch for 1.2 seconds or longer and 3 times consecutively.
6.The service reminder indicator is turned ON, and the current schedule is displayed on the odometer display.
7.While the current schedule is displayed, press the meter information switch for less than 1.2 seconds and 3 times consecutively.
8.The odometer display is shifted to the schedule selection mode.
9.When the meter information switch is pressed for less than 1.2 seconds, the schedule is shifted, and when the switch is pressed for 1.2 seconds or longer, the displayed schedule is set.
note For schedule, "JPN", "NAS", "GCC/EXP" and "MMAL" can also be selected. However, the using shall be for "EU" only. <Vehicles for EUROPE and RUSSIA>
note For schedule, "JPN", "NAS", "AUS (MMAL)" and "EU" can also be selected. However, the setting shall be for "GCC (GCC/EXP)" only. <Vehicles for SOUTH AFRICA>
10.The schedule set in Step 9 is displayed for 3 seconds, and the warning period to the next time is displayed.
Schedule table <Vehicles for EUROPE and RUSSIA>
EU 1 (initial condition) <Vehicles for EUROPE>
Elapsed time (month)
Every 12 elapsed month
Driving distance (miles)
Every 9,000 miles of driving distance
Driving distance (km)
Every 15,000 km of driving distance
EU 2 (initial condition) <Vehicles for RUSSIA>
Elapsed time (month)
Every 12 elapsed month
Driving distance (miles)
Every 12,500 miles of driving distance
Driving distance (km)
Every 20,000 km of driving distance
Optional INT
The optional schedule can be set. (Only M.U.T.-III can be set.)
OFF Display
Without function. "OFF" is displayed on the odometer/tripmeter.
Function OFF
Without function (Only M.U.T.-III can be set.)
Может кто то сможет перевести эту инструкцию поточнее?
